Search results

Rumschinski, P.; Shona-Laila, D.; Findeisen, R.: Set-based Parameter Estimation for Symmetric Network Motifs. 18th IFAC World Congress, Milano, Italy, August 28, 2011 - September 02, 2011. IFAC Proceedings Volumes 44 (1), pp. 10454 - 10459 (2011)

Savchenko, A.; Rumschinski, P.; Findeisen, R.: Fault Diagnosis for Polynomial Hybrid Systems. In: Proceedings of the 18th IFAC World Congress, 2011, pp. 2755 - 2760. 18th IFAC World Congress, Milano, Italy, August 28, 2011 - September 02, 2011. (2011)

Schenkendorf, R.; Mangold, M.: Qualitative and Quantitative Optimal Experimental Design for Parameter Identification of a MAP Kinase Model. 18th IFAC World Congress, Milan/Italy, August 28, 2011 - September 02, 2011. IFAC Proceedings Volumes 44 (1), pp. 11666 - 11671 (2011)

Schmuck, C.; Woittennek, A.; Gensior, A.; Rudolph, J.: Flatness-based feed-forward control of an HVDC power transmission network. In: 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC 2011), pp. 1 - 6. INTELEC - 33rd International Telecommunicatinos Energy Conference, Amsterdam, The Netherlands, October 09, 2011 - October 13, 2011. (2011)

Schröder, D.; Krewer, U.: Basic model of secondary zinc air batteries to quantify environmental impacts. In: 2011 AIChE Annual Meeting: conference proceedings, p. 737 d. AIChE Annual Meeting, Minneapolis, USA, October 16, 2011 - October 21, 2011. (2011)

Schwarick , M.; Heiner, M.; Rohr, C.: MARCIE - Model Checking and Reachability Analysis Done EffiCIEntly. In: 2011 Eighth International Conference on Quantitative Evaluation of Systems (QEST), pp. 91 - 100. 2011 Eighth International Conference on Quantitative Evaluation of Systems (QEST), Aachen, Germany, September 05, 2011 - September 08, 2011. (2011)

Seel, T.; Schauer, T.; Raisch, J.: Iterative Learning Control for Variable Pass Length Systems. 18th IFAC World Congress, Milano, Italy, August 28, 2011 - September 02, 2011. IFAC Proceedings Volumes 44 (1), pp. 4880 - 4885 (2011)

Sistla, V. S.; Lorenz, H.; Seidel-Morgenstern, A.: Influence of an excess of resolving agent on diastereomeric salt resolution. In: BIWIC 2011 - 18th International Workshop on Industrial Crystallization, pp. 321 - 326 (Eds. Kadam, S. S.; Kulkarni, S. A.; Horst, J. H. t.). BIWIC 2011 - 18th International Workshop on Industrial Crystallization, Delft, The Netherlands, September 07, 2011 - September 09, 2011. (2011)

Temmel, E.; Lorenz, H.; Seidel-Morgenstern, A.: Rational process design of a continuous crystallization for separation of substances with solid solution behavior. In: BIWIC 2011 - 18th International Workshop on Industrial Crystallization, pp. 328 - 331 (Eds. Kadam, S. S.; Kulkarni, S. A.; Horst, J. H. t.). BIWIC 2011 - 18th International Workshop on Industrial Crystallization, Delft, The Netherlands, September 07, 2011 - September 09, 2011. (2011)

Varutti, P.; Findeisen, R.: Event-based NMPC for networked control systems over UDP-like communication channels. In: American Control Conference (ACC), 2011, pp. 3166 - 3171. American Control Conference (ACC), 2011, San Francisco, CA, USA, June 29, 2011 - July 01, 2011. (2011)

Varutti, P.; Grüne, L.; Pannek, J.; Findeisen, R.: Robustness of Prediction Based Delay Compensation for Nonlinear Systems. 18th IFAC World Congress, Milano, Italy, August 28, 2011 - September 02, 2011. IFAC Proceedings Volumes 44 (1), pp. 203 - 208 (2011)

Yu, H.; Thévenin, D.; Janiga, G.: Numerical Prediction of Hemolysis Based on Computational Fluid Dynamics. In: Proceedings of the ECCOMAS Thematic International Conference on Simulation and Modeling of Biological Flows. ECCOMAS Thematic International Conference on Simulation and Modeling of Biological Flows (SIMBIO 2011), Brussels, Belgium, September 21, 2011 - September 23, 2011. (2011)

Roloff, C.; Bendicks, C.; Michaelis, B.; Tarlet, D.; Thévenin, D.; Zähringer, K.; Wunderlich, B.: 3D-PTV in gas flows using fluorescent micro-particles. In: Proceedings of the 14th International Symposium on Flow Visualization. 14th International Symposium on Flow Visualization, Daegu, Korea, June 21, 2010 - June 24, 2010. (2010)

Adiche, C.; Sundmacher, K.: Selection of membrane contactors used in a membrane distillation based micro-separator. In: PRES 2010: 13th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction [joint event, CHISA 2010 and ECCE-7], P7.98, p. 1001. PRES 2010 : 13th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction [joint event, CHISA 2010 and ECCE-7], Prague, Czech Republic, August 28, 2010 - September 01, 2010. (2010)

Adiche, C.; Sundmacher, K.: Effect of hydrodynamic conditions on mass and heat transfer in a novel membrane based continuous micro-distillation device: experimental approach. In: Distillation, Absorption 2010: conference proceedings, pp. 283 - 288 (Eds. de Haan, A. V.; Koojiman, H.; Górak, A.). 9th Distillation & Adsorption 2010, Eindhoven, The Netherlands, September 12, 2010 - September 15, 2010. (2010)

Arellano-Garcia, H.; Geist, S.; Wozny, G.; Raisch, J.: Benchmark for Hierarchical Plantwide Control of Hybrid Chemical Processes: Control of Coupled Batch and Continuous Reactors. In: 20th European Symposium on Computer Aided Process Engineering, Vol. 28, pp. 541 - 546 (Eds. Pierucci, S.; Buzzi Ferraris, G.). ESCAPE 20 - 20th European Symposium on Computer Aided Process Engineering, Ischia, Neapel, Italy, June 06, 2010 - June 09, 2010. (2010)

Bajcinca, N.: Forward and inverse integration of population balance equations with size-dependent growth rate. DYCOPS 2010 - 9th International Symposium on Dynamics and Control of Process Systems, Leuven, Belgium, July 05, 2010 - July 07, 2010. IFAC Proceedings Volumes 43 (5), pp. 415 - 420 (2010)

Bajcinca, N.; Hofmann, S.; Raisch, J.; Sundmacher, K.: Robust and optimal control scenarios for batch crystallization processes. In: 20th European Symposium on Computer Aided Process Engineering, Vol. 28, pp. 1605 - 1610 (Eds. Pierucci, S.; Buzzi Ferraris, G.). ESCAPE 20 - 20th European Symposium on Computer Aided Process Engineering, Ischia, Neapel, Italy, June 06, 2010 - June 09, 2010. (2010)

Bajcinca, N.; Kouhi, Y.: Distributed Optimization for feedforward global chassis control. In: Preprints / IFAC Symposium Advances in Automotive Control, p. MB 1-3. 6th IFAC Symposium "Advances in Automotive Control", Munich - Germany, July 12, 2010 - July 14, 2010. (2010)

Bajcinca, N.; Oliveira de, V.; Borchert, C.; Raisch, J.; Sundmacher, K.: Optimal control solutions for crystal shape manipulation. In: 20th European Symposium on Computer Aided Process Engineering, Vol. 28, pp. 751 - 756 (Eds. Pierucci, S.; Buzzi Ferraris, G.). ESCAPE 20 - 20th European Symposium on Computer Aided Process Engineering, Ischia, Neapel, Italy, June 06, 2010 - June 09, 2010. (2010)